- Character size from 60 to 150 mm
- long durability of marking
- large, easily legible characters
Technical Characteristics
Completely redesigned marking heads for high performance even in the harsh steel plant environment. Equipment manufactured using standardised modules, resulting in high reliability and low maintenance of equipment. Forced air cooling to maintain low ambient temperatures within marking unit. System based on conventional electric arc spraying.
Economical and technical benefits
Variable character size, only electrical and pneumatic media supply. Low operating costs with standard welding wires up to 900°C. Marking of products also possible at higher temperatures with special filling wire. Large characters, highly visible marks. Durability of at least a half year outdoors.
Technical Design
Machine frame is a robust fabricated construction, linear rails, safety devices for marking head. Electrical drives with servo motors via gear rack and pinion and cable drag chains. Writing movement of marking head with linear x and y axes driven by servo motors. Control systems (standard Siemens S7 PLC) with standard interfaces to plant equipment and fault diagnosis system.
Options
- Other control systems (Allen Bradley, etc.)
Technical data:
| General Data |
| Usual applications |
Slabs and blooms |
| Temperature range of product |
20°C – 1,200°C |
| Type of mark |
White or yellow |
| Marking Data |
| Character size |
60 – 150 mm |
| Number of lines |
1 or 2, depending on character size |
| Typical time of marking |
Approx. 60 sec for 10 characters at 100 mm size |
| Electrical |
| Mains supply |
3 x 400 V, 50 Hz (other voltages also possible) |
| Power consumption |
Approx. 13 kVA |
| Control voltage |
24 VDC |
| Pneumatic |
| Compressed air or nitrogen |
Filtered and drained |
| Pressure |
Min. 4 bar |
| Consumption |
Max. 0.2 Nm³/min |
| Consumables |
| Welding wire |
Al, AlBz, special wire |
Image Gallery:
References
